-
Uncategorized
-
Section 1.0 — Dress Standard, Induction and Sign-On10 xp
-
Section 2.0 — OH&S Site Induction
-
Section 3.0 — ASC247 / Retail Client Site On-Site Cleaning Manual
-
Section 4.0 — Correct Chemical Usage and Safety
-
Section 5.0 — Equipment Care, Maintenance and Troubleshooting
-
Section 6.0 — Trading Floor Cleaning Process
-
Section 7.0 — Amenities Cleaning Process
-
Section 8.0 — Office and Tea Room Cleaning Process
-
Section 9.0 — Window Cleaning Process
-
Section 10.0 — Specifications and Cleaning Schedules
-
Certification Statement - Retail Cleaning Training
-
Section 7.0 — Amenities Cleaning Process
-
Check ceiling vents and dust with a dust brush as required prior to commencing any other process.
-
Wipe all partition tops and tops of mirrors and doors.
Wipe over all partitions and doors to remove any dirt or marks.
Basins should be cleaned using Resolve and/or Lemon Disinfectant.
-
Spray basins liberally and use a cloth or the centre of a red scrubbing pad or steel wool to remove any dark rings or stains.
-
Pay particular attention to areas around tap fittings.
-
Rinse with clean water and dry with paper towel or cloth.
Urinal sides, bases, steps and wall-mounted urinals are to be cleaned using Resolve and a toilet brush.
Toilet suites should be cleaned using Resolve and/or Lemon Disinfectant.
-
Apply liberally to inside of bowls.
-
Scrub with a toilet brush.
-
Flush to remove any residue.
-
Wipe inside and outside of bowls and cistern with paper towel or cloth.
Use a spray bottle with Lemon Disinfectant or Resolve and spray walls, a section at a time.
-
Wipe clean using paper towel or a cloth.
-
Ensure all areas are completed, including under hand dryers and under sinks.
Add 100ml of Lemon Disinfectant or Resolve to a bucket and fill with clean hot water.
-
Mop all corners and edges, including behind toilet bowls.
-
Mop the entire floor thoroughly.
-
Use steel wool to remove any build-up in corners or edges.
This should be your final step in the process.
IMPORTANT:
RED Bucket and RED Mop MUST be used for Amenities ONLY.
DO NOT use the same mop and bucket for ANY OTHER AREA.Locker rooms:
-
Wipe down all walls and doors in locker rooms.
-
Remove any dirty marks or stains using Resolve.
-
Place 40ml of Neutral Cleaner in a bucket and fill with warm water.
-
Mop all locker room floors, including corners and edges.
-
Use steel wool to remove any build-up in corners and edges.
-
Dust door grills (if applicable) with a dust brush or wipe with a damp cloth.
-
Clean door push plates with glass cleaner and paper towel or a clean cloth.
Section 7.0 — Assessment
Outcomes:
At the end of this session, a participant will be able to:
-
Identify and use the correct equipment, chemical and process required to clean amenities.
-
Identify the related hazards.
-
Views | |
---|---|
1 | Total Views |
1 | Members Views |
0 | Public Views |
Actions | |
---|---|
0 | Likes |
0 | Dislikes |
0 | Comments |
Share by mail
Please login to share this webpage by email.